CP100D UHF ANALOG NON-DISPLAY PORTABLE RADIO AAH87YDC9JC2AN
Simple and effective for the light user who values ease and efficiency. Easy to use and practical, the CP100d offers analog voice communications, and MOTOTRBO digital when you're ready — for a straightforward path to digital migration.
Standard Package
CP Radio
Li-ion battery
Charger w/power supply
Belt clip
Antenna
Operating Manual
Safety Manual
GENERAL SPECIFICATIONS
UHF BAND 1
Channel Capacity
Typical RF Output Low Power
1 W
High Power
4 W
Frequency
403-480 MHz
Radio Dimensions (H x W x D) with battery: Li-Ion 1700 mAh
4.7 x 2.2 x 1.3 in (120.0 x 55.0 x 33.0 mm)
High Cap Li-Ion 2250 mAh
4.7 x 2.2 x 1.6 in (120.0 x 55.0 x 40.6 mm)
Weight with battery: Li-Ion 1700 mAh
9.7 oz (276 g)
High Cap Li-Ion 2250 mAh
9.9 oz (281 g)
Power Supply
7.5V (Nominal)
BATTERY
Average battery life at 5/5/90 duty cycle with carrier squelch and transmitter in high power.2
Li-Ion 1700 mAh
Analog: 10.7 hrs / Digital: 14.4 hrs
High Cap Li-Ion 2250 mAh
Analog: 15.0 hrs / Digital: 20.0 hrs
RECEIVER
Frequency
403-480 MHz
Channel Spacing
12.5 kHz / 25 kHz3
Frequency Stability (-30°C, +60°C, +25°C Ref)
± 0.5 ppm
Analog Sensitivity (12 dB SINAD)
0.3 uV / 0.22 uV (typical)
Digital Sensitivity (5% BER)
0.25 uV / 0.19 uV (typical)
Intermodulation (TIA603D)
70 dB
Adjacent Channel Selectivity (TIA603D)
45 dB @ 12.5 kHz / 70 dB @ 25 kHz
Spurious Rejection (TIA603D)
70 dB
Rated Audio
0.5 W (Internal)
Audio Distortion @ Rated Audio
5% (3% typical)
Hum and Noise
-40 dB @ 12.5 kHz / -45 dB @ 25 kHz
Audio Response
TIA603D
Conducted Spurious Emissions (TIA603D)
-57 dBm
TRANSMITTER
Frequency
403-480 MHz
Channel Spacing
12.5 kHz / 25 kHz3
Frequency Stability (-30°C, +60°C, +25°C Ref)
± 1.5 ppm
Low Power Output High Power
1W
Modulation Limiting
4W
FM Hum and Noise
± 2.5 kHz @ 12.5 kHz / ± 5.0 kHz @ 25 kHz
Conducted / Radiated Emission
-40 dB @ 12.5 kHz / -45 dB @ 25 kHz
Adjacent Channel Power
-36 dBm < 1 GHz / -30 dBm > 1 GHz
Audio Response
60 dB @ 12.5 kHz / 70 dB @ 25 kHz
Audio Distortion
TIA603D
4FSK Digital Modulation
3% (typical)
Digital Vocoder Type
12.5 kHz Data: 7K60F1D and 7K60FXD
Digital Protocol
12.5 kHz Voice: 7K60F1E and 7K60FXE Combination of 12.5 kHz Voice and Data: 7K60F1W
2 Actual battery runtime observed may vary.
AMBE +2™
3 25 kHz may not be available in the U.S. for Part 90 operation due to the FCC’s Narrowbanding requirements. Specifications subject to change without notice. All specifications shown are typical.
