The MOTOTRBO CM200d mobile radio is a reliable, cost-efficient solution to keep your team in contact so they can communicate, coordinate and collaborate for maximum efficiency and safety. The CM200d is designed for the everyday driver, so your workers can connect without distraction, whether they’re delivering cargo, dispatching trucks, or driving a school bus. The CM200d is easy to use and delivers clear communication for maximum efficiency of your operation.

• Standard Package
• Mobile radio
• Earpiece
• Cable and mount
• Operation manual
• Safety guide

GENERAL SPECIFICATIONS	UHF BAND 1
Channel Capacity	16
Typical RF Output Low Power	1-25 W
High Power	25-40 W
Frequency	403-470 MHz
dimensions (H x W x L)	1.7 x 6.7 x 5.3 in (44 x 169 x 134 mm)
Weight	2.9 lbs (1.3 kg)
Current drain Standby	0.81 a max
Rx @ Rated audio Transmit	2 a max
FCC description	1-25 W: 11.0 a max
IC description	25-40 W: 14.5 a max
RECEIVER	1-25 W: aBZ99FT4092
Frequency	25-40 W: aBZ99FT4093
Channel Spacing	1-25 W: 109aB-99FT4092
Frequency Stability (-30°C, +60°C, +25°C Ref)	25-40 W: 109aB-99FT4093
analog Sensitivity (12 dB SInad)
digital Sensitivity (5% BER)	403-470 MHz
Intermodulation (TIa603d)	12.5 kHz / 25 kHz2
adjacent Channel Selectivity (TIa603d)	± 0.5 ppm
Spurious Rejection (TIa603d)	0.3 uV
Rated audio	0.22 uV (typical)
audio distortion @ Rated audio	0.25 uV
Hum and noise	0.19 uV (typical)
audio Response	70 dB
Conducted Spurious Emissions (TIa603d)	50 dB @ 12.5 kHz
TRANSMITTER	70 dB @ 25 kHz2
Frequency	70 dB
Channel Spacing	4 W (Internal)
Frequency Stability (-30°C, +60°C, +25°C Ref)	7.5 W (External - 8 ohms)
Low Power Output	13 W (External - 4 ohms)
High Power Output	3% (typical)
Modulation Limiting	-40 dB @ 12.5 kHz / -45 dB @ 25 kHz2
FM Hum and noise	TIa603d
Conducted / Radiated Emission	-57 dBm
adjacent Channel Power
audio Response	403-470 MHz
audio distortion	12.5 kHz / 25 kHz2
FM Modulation	± 0.5 ppm
4FSK digital Modulation	1-25 W
digital Vocoder Type	25-40 W
digital Protocol	± 2.5 kHz @ 12.5 kHz / ± 5.0 kHz @ 25 kHz2
2 25 kHz may not be available in the U.S. for Part 90 operation due to the FCC’s narrowbanding requirements. Specifications subject to change without notice. all specifications shown are typical.	-40 dB @ 12.5 kHz / -45 dB @ 25 kHz2
Radio meets applicable regulatory requirements.	-36 dBm < 1 GHz / -30 dBm > 1 GHz